Page 42 - Shawl Weaving Artisan - TP

Textile & Handloom Exercise 1.2.23

Shawl Weaving Artisan - Winding and Warping

Operation of warp and winding machine

Objectives : At the end of this exercise you shall be able to
• perform setting of warping and winding machine.

Requirements

Tools/Equipment’s/Instruments
• Winding machine - 1No. • Reed - 1No.
• Warp drum - 1No. • Bobbins - 1No.
• Creel - 1No. • Measuring tape - 1No.
• Warping heck - 1No. • Lease rods - 1No.

PROCEDURE

A Start the Winding Machine
1 Turn on the winding machine at a moderate 6 Check for broken ends and fix immediately.
speed. 7 Store wound pirns near the weaving section for

2 Monitor the yarn supply and ensure uniform easy access.
winding onto pirns/bobbins.
8 Ensure the warping process finishes in time for
3 Replace filled pirns/bobbins regularly to maintain the next loom setup.
continuous weft supply.
9 Clean the drum surface, creel, and guides to
B Start the Warping Machine prevent contamination.
1 Before starting the warping process, check the 10 Securely fix the empty warp beam onto the
machine for proper working conditions. machine.
2 Begin winding the warp threads onto the warping Final quality check and maintenance
drum.
1 Inspect both warp and weft yarns for tension
3 Adjust speed to match the required warp length. uniformity and defects.
4 Monitor tension and alignment to avoid defects. 2 Clean machines after operation to remove dust and
fiber residues.
5 Adjust winding and warping speeds based on
weaving consumption. 3 Lubricate moving parts to ensure smooth functioning
for the next production cycle.

Textile & Handloom Exercise 1.2.24
Shawl Weaving Artisan - Winding and Warping

Yarn package faults and causes

Objectives : At the end of this exercise you shall be able to
• identify yarn package faults and causes.

Requirements
Tools/equipment’s/Instruments

• Notebook - 1No. • Pencil - 1No.
• Eraser - 1No. • Sharpener - 1No.

PROCEDURE

Refer exercise No.1.1.06 - Task No 2

30